Description
- The CO2 laser power source has a high match performance with the laser tube and is compact in size, light in weight, simple to use, and can be connected to the laser tube directly. Effectiveness, high performance, strong cutting power, and the ability to prolong the life of the laser tube. Quick response time.
- High efficiency is achieved by using a zero-current half-bridge soft switching circuit in this power supply, which also makes it quick to react.
- Simple Port Control is appropriate for both high-level and low-level signals. To start and stop the laser, use the TTL level. A protective switch is also fitted at the same time to determine whether there is water or ventilation outdoors.
- The laser power adjustment may input analog signals ranging from 0 to 5V as well as PWM signals.
- The power supply contains an open circuit protection feature that can prevent damage to the laser power supply caused by the laser tube’s burst.
- Each power supply will go through a factory aging test that lasts 12 hours at a high temperature of 60 ° C with a full load and 500 starts and stops in 7 seconds.
Specifications
- Power: 40W
- Input Voltage: AC110V / AC220V
- Maximum Output Voltage: 23KV
- Maximum Output Current: 20mA
- Efficiency: 90%
- Response Speed: ≤1ms
- Cooling Method: fan cooling
- Gross Weight:1.2kg/2.64lbs
- Package Size: 23x23x12cm/9x9x5.11inch
Package Content
- 1 x High Voltage Connector
- 1 x Laser Power Supply (40W)
Condition: New
Shipping: Nationwide
Delivery: 2 to 5 business days
We put the needs of our customers first and foremost. Don’t hesitate to contact us for assistance.
There are no reviews yet.